|
PERFORMANCE OVERDRIVE
|
Mustangs, Camaros, Firebirds, Corvettes, Grand Nationals, Suburbans, Tahoes 9.5",10.5", & 12" Torque converters (lock-up & non lock-up)
GM 700R4/4L60E/200-4R
Hot Street & Strip
Part # PTC11700
ProTorque's performance torque converter for 700R4/4L60E and 200-4R transmissions is designed for performance street and occasional track applications, and is available in lock up and non lock up versions. It provides the perfect mix of driveability and performance with stall speeds ranging from 2400 to 3500. The unit can be used in everything from mild street rods and modified Corvettes to full race Buick Grand Nationals. This converter features a high rate of torque multiplication, increased lock up efficiency and durability.
|
|
|
97 & Later C5 Corvette
Part # PTC-11700C5
Independent testing from Vette magazine has shown .5-seconds and 4mph improvement over the stock torque converter with ProTorque's C5 Corvette. Specifically designed for the 1997 and newer C5 Corvettes, these torque converters feature high torque multiplication with absolutely no loss of driveability.
|
|
|
GM 4L80E
Part # PTC-114L80E
ProTorque is proud to introduce a high performance torque
converter designed specifically for the 4L80E Trans. Independent
testing by Car Craft Magazine with their 502 crate motor project
car has shown .4 seconds and 4 mph improvement in the quarter
mile over the stock torque converter with absolutely no loss
of driveability. This is a perfect converter for street machine
and street rod applications.
|
|
|
Ford E4OD I 4R100
Part # PTC-11E4OD
ProTorque is now offering a torque converter for E4OD/4R100
transmissions. It's rated at 2400-2800 stall speed depending
on the engines' power curve. This easy to install, bolt-in replacement
torque converter will dramatically improve your ETs with no
further modifications. This torque converter allows performance
increases in most '94 & up vehicles without reprogramming the
driveline computer.
|
|
|
Ford AODE/4R70W
Part # PTC-11AODE
A real popular converter for '94 and later Mustangs and
late model pickup trucks is ProTorque's 11-inch diameter converter.
It's rated at 2400-2800 stall speed depending on the engines'
power curve. This easy-to-install, bolt-in replacement torque
converter will dramatically improve your ET's with no further
modifications. This torque converter allows performance increases
in most '94 & up vehicles without reprogramming the driveline
computer.
|
|
|
Dodge Ram and Dakota
Part # PTC-T37LU9OSS
Designed for A518 and 47RE transmissions this 11-inch diameter
torque converter provides a large increase in off-the-line performance.
Featuring a precision-milled stator and increased lock-up clutch
capacity, this converter is perfect for everyday performance
driving.
|
|
|
